More Cocker Problems

[Beaker]

Dave,

Stop what you're doing and follow this guide:

http://www.moodypaintball.com/vantrepes/pages/ergo.htm

Looks the biz, I'll have a read and get back to you.

 

[Davo]

O ring OK

Checked O ring, looks fine, no tears nicks or anything ?

 

[jahlad]

nice find beaker...its the oring labeled as part 5iston stem oring im on about

edit: erm how did that get there!!

 

[Beaker]

good cut away

http://thecog.bizland.com/regulators.html

 

[Beaker]

And if that doesn't work, what hose fittings do you use?

 

[Davo]

Ongoing

Right put it all back together, right I think

took the reg off the gun attached the air system, the air is coming out of the top as you would expect so the air can enter the ASA

Beaker, got 6mm hose connected to an eclipse drop

 

[Beaker]

Ok, so if it's all back together.

Screw the Ergo all the way in,
Cock gun
Gas up,

Screw out the Ergo until the leak on the vent hole stops and the gun "feels" right when you pull the trigger, you'll need to manually cock the gun each time until the pressure is high enough that the input gas pressure does it for you. I'd say you're talking at least 1 or 2 full turns.

If it's not sealing then either
1) the or-ing in knackered
2) the oring just needs a bit of grease on it
3) you put it together wrong

Report back mate

 

[jahlad]

heheh this is getting long winded now! told my misses i was 'just helping a guy with a prob' about an hour and a half ago! hope you know you have totalled my chances of a sh*g!

 

[Beaker]

Originally posted by jahlad
hope you know you have totalled my chances of a sh*g!

Pay more

 

[jahlad]

heheh dont think theres much that would get her out of the mood shes in!