Well the current settings on the stock board would be as follows, open grip frame when the gun is on and press and hold the little copper button on the bottom of the board, it will flash and then either flash red or green as the last flash, if it flashes green then you can reprogramme the board if it flashes red you have just put the tournament lock on so you will have to repeat the process again.
Now once you have taken of the tournament lock you will need to turn the gun off then holding in the trigger turn the gun on and keep trigger held, the led will now go white, keep the trigger held until it goes blue. Once it has gone blue you are on the first setting, press the trigger twice more till it goes to solid white. Now press and hold the trigger till the light goes off, it will then flash 'x' amount of times, this indicate's which mode you are currently in. Fresh from the box it will flash 1 will is semi uncapped, once it has finished flashing pull the trigger 5 times, this puts it into mode 5 which is the millenium max ramp, or pull it 4 times for millenium mid ramp. Both have same kick in but mode 5 measure the time between pulls from the first shot so it kicks it alot easier.
But as we all know the millenium rules have now changed - i will get details up tomorrow of how anyone with a droid at present can get there board flashed with the new software.
Am i right lump?