Impy question

[L J]

Originally posted by F3Z
sorry who was the last man live in nearly ever game??? hmm dont remember you getting on the feild once. back to impy stuff please guys

thats cos you were probably cowering behind your bunker the whole game

anyways, is it the screw or where the screw, screws in threaded? either way any good hardware store should be able to retap it. speak to Tom Allen . he drilled, and re tapped the i frame, and even had some grub screws for it, top bloke!

 

[Skeet]

Dude...speak to your old man, drill it out if its stripped, reasonably coarse thread, he should have a tap, then loctite another in...dont do it again or by an E-Blade!

 

[Munkeh]

Dude... I don't think an e-blade will fit an impulse

 

[Skeet]

You know what i mean....silly Munkeh!

 

[Rabies]

Is the screw still in there? If so, you should be able to get it out by removing the tapeworm (or the plug where one would fit) and the air filter from inside, and the screw should drop out. Replace both screws with loctite, et voila!

 

[F3Z]

ok screw is still inside. Cant get it back via the hole it went in. Undid the like chamber it shoud be in (the tapeworm would normally be here) and theres like some pocket thing in there stopping it from dropping out?? ok any ideas here???

 

[F3Z]

air filter, could this be whats stopping the screw, looks liek the little pocket holding the screw?? If so can i remove this and how??

 

[F3Z]

Ok got filter out, got screw out got end screws and filter back in securely. now to getting the thing back in is a issue as theres so much loctite left there its just not loving it. Any help???

 

[Skeet]

Either, just bung it back with more loctite...or....clean it out by winding it in and out, maybe a pick if you have one....then bung it in with some green loctite.

 

[L J]

take the filter out again(so not to damage it) and heat the loctite with a hair dryer, and you should be able to wind the screw in again as the loctite will be soft