impulse problem
- Thread starter iplaymindgames
- Start date
Only if he turned the primary reg up......oh dear!Originally posted by le-pig
he didn't put above 250 psi through it did he
indeed
Ok can you say what he did in the time he went from where it was working to the feild???
Just a few Q's, whats the input pressure into the 2nd reg?
What noise does the marker make when you try and fire it? (can you hear any air coming out of the marker?/ or does it sound like there no air at all?)
When you pull the trigger can you hear the board "Click" (if not its ya trigger cusing the prob)
Stupid Q, did he turn the gas/marker on?
Try another battery, although you say its new, you never know
Answer them and i would help aload
ok heres whats up now..
i stripped down the whole gun, everything is set up properly. the gun is now making a popping noise when i pull the trigger almost as if its shooting but the bolt isnt cycling foward.
the tank is a high pressure output
the maxflow is set right now at about 180psi
i was playing around with the jackhammer 2 but still not working
i stripped down the whole gun, everything is set up properly. the gun is now making a popping noise when i pull the trigger almost as if its shooting but the bolt isnt cycling foward.
the tank is a high pressure output
the maxflow is set right now at about 180psi
i was playing around with the jackhammer 2 but still not working
Erm, bolt pin is in correctly and you have got the bolt the right way up?? Sorry, but just checking!
Cricket Board?
Input 175 psi?
New batteries?
Guess your dwell is to low...
Easy to adjust:
Increase the dwell to about 15 clicks from the bottom.
Turn LPR to it chronos about ~280 fps.
Lock ALL regulators inkl LPR.
In the future, use your dwell to low/high your fps.
If this does not work, check so that the dwell screw or buttons are intact.
Input 175 psi?
New batteries?
Guess your dwell is to low...
Easy to adjust:
Increase the dwell to about 15 clicks from the bottom.
Turn LPR to it chronos about ~280 fps.
Lock ALL regulators inkl LPR.
In the future, use your dwell to low/high your fps.
If this does not work, check so that the dwell screw or buttons are intact.