cheap little paintball/anything cam
- Thread starter Monkeyboi
- Start date
i know it sounds like im just saying
it could be this
or
it could be this
or and so on lol
but it mite be where your bl marq mite have more kick then my dm and sp1 its like me saying "well mine works yours must be efED lol"
it could be just down to the kick of the marker i will try my girlfriend back up marker 2mora its a piranha gti so thats got alot of kick to it if i get the same as u then we have found the culprit then we just need to find a solution to it ...
thanks, i appreciate your help. atleast weve ruled out the card!!! so has to be the mount or as yuo say the marker.
i wouldve thought that a BL would have had less kick, but ive only got mechanical markers to try which have one heck of a kick. one thing i didnt ask bambulas was what marker he used..
Your holder which is made from the two pipe clips, are they just bolted together? maybe the camera is to close to the barrel? one thing i havent tried is using the barrel that came with the marker, im using an empire kit barrel, mainly because i dont want to scratch my bl barrel.
Im paintballing this weekend so i might try the first game with my bl barrel and make a film, then switch over for hte rest of the day see what happens. Ill try some tougher foam aswell between the two see what happens.
the only other thing i can think off is trying to make a mount that i can screw to my bike clamp that holds the camera. simialr to your mint tin holder.
i wouldve thought that a BL would have had less kick, but ive only got mechanical markers to try which have one heck of a kick. one thing i didnt ask bambulas was what marker he used..
Your holder which is made from the two pipe clips, are they just bolted together? maybe the camera is to close to the barrel? one thing i havent tried is using the barrel that came with the marker, im using an empire kit barrel, mainly because i dont want to scratch my bl barrel.
Im paintballing this weekend so i might try the first game with my bl barrel and make a film, then switch over for hte rest of the day see what happens. Ill try some tougher foam aswell between the two see what happens.
the only other thing i can think off is trying to make a mount that i can screw to my bike clamp that holds the camera. simialr to your mint tin holder.
yep
http://i857.photobucket.com/albums/ab134/rosstheguyver/IMAG0055.jpg
i was thinking you may have the foam between the mount and the cam but it the cable ties are to tight then the foam cant and wouldn't be achieving anything other then to stop the mount from scratching the camera try loosening the cable ties as the foam should fill the gap and hold the cam in
http://i857.photobucket.com/albums/ab134/rosstheguyver/IMAG0055.jpg
i was thinking you may have the foam between the mount and the cam but it the cable ties are to tight then the foam cant and wouldn't be achieving anything other then to stop the mount from scratching the camera try loosening the cable ties as the foam should fill the gap and hold the cam in
Hmmmmmmmmmmmm, that it ideal, but not much in protection. Edit - Off to B&Q tomorow then
Hey mate
All of my videos were made using my Etek. It had a zick kit fitted which really nulled the kick, but I doubt the BL has any more.
Just for everyones reference, this is how my was set up. It's a poundland bicycle light mount that's had my camera cable-tied very tightly onto it with a piece of fairly tough foam in between.
You're quite a conundrum, I have to admit.
Attachments
if it helps the clips haveHmmmmmmmmmmmm, that it ideal, but not much in protection. Edit - Off to B&Q tomorow then
5\22
on the side of them
lol i know.
ive done everythig weve talked about aswell.
I think i have the exact same bike lamp and bracket, i got the same camera, just cant stop it vibrating, so maybe it is the foam, as my etek had more kick than my bob long.
Ive got some tougher foam at work so ive just replaced the softer foam with it and made sure it was tight, but not so tight it is butted up against the bracket hard.
Cant test it out till friday evenig though.
ive done everythig weve talked about aswell.
I think i have the exact same bike lamp and bracket, i got the same camera, just cant stop it vibrating, so maybe it is the foam, as my etek had more kick than my bob long.
Ive got some tougher foam at work so ive just replaced the softer foam with it and made sure it was tight, but not so tight it is butted up against the bracket hard.
Cant test it out till friday evenig though.