Calling cocker techno freaks < only >

[renie]

im good mate, im doing one like my 1st egomag

 

[gommie404]

gommie u want a
Clippard SMAV-3 just used one on a pnuemag project there about 20mm long and 7mm hex

that is the one i have now,,,, em,,,did you say you can get these,,are they from a uk company / supply

 

[gommie404]

but if u want a softer pull use a fabco MSV-2

this looks good,, where can i get my hands on one of these

 

[Gee Tee]

that is the one i have now,,,, em,,,did you say you can get these,,are they from a uk company / supply

They are made by clippard pneumatics in the USA but have UK suppliers http://www.westgroup.co.uk/catalogue.asp

Fabco parts have their own distributors in UK as well http://www.mkair.co.uk/fabco.htm

 

[gommie404]

They are made by clippard pneumatics in the USA but have UK suppliers http://www.westgroup.co.uk/catalogue.asp

Fabco parts have their own distributors in UK as well http://www.mkair.co.uk/fabco.htm

mate your a star,, for the last 3 hours i have been trying to use there US web sites,, oh my god my lop top is poop..

 

[Gee Tee]

west group are easy to deal with - I ordered some parts just before christmas. Email your exact order and they will fire back a confirmation invoice prior to taking payment over phone. As long as items are in stock you should get them in a week or so. Is there anything specific from clippard that you need?

Clippard catalogue pdf is here but it's a huge 31mb download - http://www.westgroup.co.uk/pdfs/Clippard Full Catalogue.pdf

 

[Gee Tee]

and this is the direct link to MSV-2 on Fabco online shop

http://store.fabco-air.com/proddetail.php?prod=MSV

 

[gommie404]

great i have sent out some emails,, and may be a trip out to a few of these companys may be in order,, see what they have in stock,,
and there not to far by bike from london,,, brrrrrrrrrrrrr as long as the sun is out,, i may find that i have to buy a set amount of units,, but i will deal with that when i get there,, looking good thanks for the info chaps,,

 

[gommie404]

and this is the direct link to MSV-2 on Fabco online shop

http://store.fabco-air.com/proddetail.php?prod=MSV

are,, msv 2 being a two way valve i take it,, so it would have to be used with a QEV on the ion,, to get the 3way,, i did wonder about this,,
The QEV must canel one of the 3 way valves,,

but im going to get a few different types i think and just play about with them,,and see what outcome i can come up with,,

you lot are as bad as me for tinkering,,,he he i love it

 

[Gee Tee]

They normally use a trigger/lever operated MSV-2 on pneumags to operate a clippard MPA-3 mini ram and trip sear

Theres more info here on page 13... http://fabco-air.com/pdf/Sec_13.pdf

and yes it is a 3 way micro valve

Quote:
"This is a microsize, poppet type, 3 way, normally closed, limit valve. It is primarily designed for momentary contact work that requires very light actuating forces. Therefore, is does not have a 100% seal on the actuating stem. This means that, while the valve is held actuated (and only then), there is a slight bleed to atmosphere around the stem."

Features
• Machined brass bar stock body
• Brass internal parts
• Buna-N O'Ring seals (–30° to + 250°F)
• Delrin ® roller (180° F max.)
• Plated steel lever arm
• Low operating force
Lever or roller: 40 psi – 1 oz.
100 psi – 2 oz.
Stem: 40 psi – 7 oz.
100 psi – 16 oz.
• Extremely short stroke
.005" to .010" movement of stem
normally provides sufficient pilot volume.
• Operating pressure 30 to 150 psi
• #10-32 ports
• 3 SCFM free flow at 80 psi