AutoCocker....

[Quicktime]

Quickie, need to change my 3 way, as it was a different one to retail on this system x cocker, i had to take off the whole cocking pin, cocking block, ram and than the LPR to get to the 3 way. The problem is i cant take off my LPR, most of the guides ive read talking about 'unskrewing it' but i cant find anything to unskrew. there arer three holes on the LPR which i un did and it just takes off the 'front cover' to my LPR. I put all those skrews back in. Also, i can take off the barb on my LPR, it unskrews pretty easy (i think it might be broken)......

So urm, how do i unskrew my LPR on a system-x cocker? need a piccy of the front?

 

[Skeet]

Look really close to the block...there should be, either, a nut shape or maybe two flats.

Beware of Loctite..

Pic would be good

 

[Quicktime]

which part?

 

[Skeet]

the part you want to take off really...lol
you should be able to get the 3 way off..or do you mean the noid

 

[Quicktime]

ahh i need a pic of someone taking there one off i think. Anyway here is a pic of my front.

Ignore red cricle.

Blue circle = Broken 3 Way, barbs TO big for me to just anticlock wise + unskrew.

Pink circle = LPR i cannot remove.

Barrel, ram, Qev's (removed to take off ram), Cocking Pin, Back Block and trigger frame have all been taken off.

 

[Skeet]

You want a 4mm socket, undo teh barbs on teh three way and unscrew teh thing.

 

[Skeet]

Also...the LPR look like its in teh middle, replacing the gas nut, which means its holding your front block on as well

 

[Quicktime]

Which wrench for those barbs?

 

[Quicktime]

Originally posted by Skeet
Also...the LPR look like its in teh middle, replacing the gas nut, which means its holding your front block on as well

Which i also discovered, So how do you take the front block off?

 

[Skeet]

Originally posted by Skeet
You want a 4mm socket, undo teh barbs on teh three way and unscrew teh thing.

Or a small adjustable spanner