any 'cocker tech's/enthusiasts

[desponge]

I am needing the locking screws for a lapco timing rod collar...... any help appreciated
thank you

 

[EELZ]

@Gee Tee

 

[Gee Tee]

Desponge had already messaged me to track down this timing rod etc.. and I'm out of a lot of small cocker parts. Most of my spares have gone into recent builds. The short grub screws are a bit of a pain to track down. I think they are stock 6-32 unc thread, but it's the super short length that's the problem. I normally pick up a lot of my bits on Stateside forums, but the cost of shipping in has got silly now. You could try giving Belsales a call

If that lapco timing rod was purchased new it should have come supplied with the grub screws

 

[desponge]

this one I got from the states.....they shipped without the locking screws, I have messaged them but no answer as of yet......just hoping someone over here could help out if the store that provided me with said item cant/wont help.

thanks anyway Gee Tee

 

[Gee Tee]

http://www.ebay.co.uk/itm/4-40-6-32-8-32-UNC-A2-Stainless-Socket-Grub-Screws-Allen-Bolts-10-Pack-/270852872562?pt=UK_DIY_Material_Nails_Fixing_MJ&var=&hash=item3f1016d972#ht_750wt_738

May possibly be 4-40 UNC size - I'll need to double check and get back to you

 

[Gee Tee]

Yep the coupler rod locking screws are 6-32 UNC as I suspected. If you got overlength ones you can always shorten them by hand with a small grinder/dremel. But it is a pain in the arse to do because they are difficult to hold. You need to get them the right length or they can foul the 3 way or main body, which will cause rod to catch and balls up the timing.

3way or 5way solenoid cover- 15/32"-32
Barrel- 15/16"-20 Oversize GH-7
Banjo Bolts- 1999 and earlier: 3/8"-24; 9/16"-24 in 2000 and newer; 3/4"-20 for merlin
Cocking rod- 10-32 on both ends
Detent- 3/8"-24
Eblade trigger stop set screws- 6-32
Ebade eye cover secrew- 4-40
Frame mount screws- 10-32
FRM Screw- 1/4''-28 UNF w/ a 1/4" 12point star socket head
Hammer (Nylon Setscrews)- 10-32
IVG- 3/4"-16
Lug- 1/4"-28 x 1/2 inch long
LPR- 1/8"-27 NPT
LPR Barbs- 10-32
Ram Barbs- 10-32 and 6-32
Ram Shaft- 6-32
PumpArm- 10-32
Timing rod coupler set screws - 6-32
Valve locking nut- 5/16"-24 1/4inch long setscrew
Valve jam nut- 5/8"-18 5/16" hollow lock screw

 

[jahlad]

easy, call planet and ask for small trigger screws, they are 6-32

 

[renie]

http://www.ebay.co.uk/itm/like/270852872562?hlpht=true&ops=true&viphx=1&lpid=95&device=c&adtype=pla&crdt=0&ff3=1&ff11=ICEP3.0.0&ff12=67&ff13=80&ff14=95&ff19=0

http://www.a2stainless.co.uk/Socket-Setscrews-Grub-Screws_B214T2.aspx

 

[Gee Tee]

Cheers Ren,Had already linked to first one but forgot about Stig fasteners - he's easy to deal with and I use him for any stainless steel motorcycle fixings i need too

 

[Gadget]

I've used this place for a lot of stuff in the past and can recommend them - not sure if 1/8" 6-32 is short enough?

http://www.modelfixings.co.uk/steel_grub_screws.htm#UNC grubs