angel hp/lp
- Thread starter TenaciousM
- Start date
I am running a pure energy 4500psi/88ci tank on a stock angel speed with the biggest 3-sum volumizer. does anyone have any suggestions on dwell settings and other changes from stock settings. i would really appreciate any help, the sooner the better. thanks a lot.
55 lpr, 14 dwell (increase to 17 when you are using brittle paint or do it anyway as this will reduce much of the kick, though you will use more gas) input as per your preset assuming it is the LP version of the Pure Energy, MROF hopper dependant but for a Revi set to 14 an Egg 20 and a Halo 22, this is null and void when you use Sensi but if for some reason you can't get it to pass the drop test
I just checked, sorry it took me so long, but my pure energy tank has an output pressure of 800-900 psi. it is an 88 ci 4500 psi carbon fiber wrapped tank. what settings should i use on my angel speed. dwell? mrof? (with a ricochet 2k hopper) lpr? and any other variables. right now this gun is a GAS HOG! i would greatly appreciate any help you could give me. thanks
He has an LCD, says so in his first post.Originally posted by Mark
55 lpr, 14 dwell (increase to 17 when you are using brittle paint or do it anyway as this will reduce much of the kick, though you will use more gas) input as per your preset assuming it is the LP version of the Pure Energy, MROF hopper dependant but for a Revi set to 14 an Egg 20 and a Halo 22, this is null and void when you use Sensi but if for some reason you can't get it to pass the drop test
Aren't the settings you have posted for a Speed or an A4.....??
you will not get the speed to chrony under 340 fps with a hp preset
(me and binz found this out the hard way ),the pressure needs to be between 450/650 psi.once set up you should be getting 8 pots and a hopper from a 1.1 litre 4.5k tank
,your probbably firing wayyy to hot and wasting gas also ditch the ricoshet and get a egg+y or z board as you will easily outshoot a ricoshet