Dye/proto markers are very easy to clean.
The pmr is a differnt bolt design than the other proto markers.
The bolt is spilt into 3 or 4 parts.
Alot of people use too much lube on the bolt, thinking u need it to seal the air.
You should take out the bolt. take the back cap off via the grub screws. Lube all the orings with a small amount. Look at the manaul if you have any problems.
Take care when placing the bolt back into the marker. You need to line up the markings on the bolt with the marker to make sure your not going to damage the bolt.
You dont need to lube the hyper 2 all the time (once every 6 - 8 months should be fine)
If you have any problems contact your local dye dealer or dye direct. Or me
The pmr is a differnt bolt design than the other proto markers.
The bolt is spilt into 3 or 4 parts.
Alot of people use too much lube on the bolt, thinking u need it to seal the air.
You should take out the bolt. take the back cap off via the grub screws. Lube all the orings with a small amount. Look at the manaul if you have any problems.
Take care when placing the bolt back into the marker. You need to line up the markings on the bolt with the marker to make sure your not going to damage the bolt.
You dont need to lube the hyper 2 all the time (once every 6 - 8 months should be fine)
If you have any problems contact your local dye dealer or dye direct. Or me