Welcome To P8ntballer.com
The Home Of European Paintball
Sign Up & Join In

Adice on lubing

mdking

Platinum Member
Aug 27, 2004
514
5
43
www.mayhem-paintball.co.uk
Dye/proto markers are very easy to clean.

The pmr is a differnt bolt design than the other proto markers.

The bolt is spilt into 3 or 4 parts. :)

Alot of people use too much lube on the bolt, thinking u need it to seal the air.

You should take out the bolt. take the back cap off via the grub screws. Lube all the orings with a small amount. Look at the manaul if you have any problems.

Take care when placing the bolt back into the marker. You need to line up the markings on the bolt with the marker to make sure your not going to damage the bolt.

You dont need to lube the hyper 2 all the time (once every 6 - 8 months should be fine)

If you have any problems contact your local dye dealer or dye direct. Or me :)
 

Game

Doing men things to men in the woods atm
Nov 21, 2004
2,539
190
98
Dereham,Norfolk
....sick *******,lol! Ok thanks for help, ive never taken apart a gun before so im a little worried about lubing my soon to come PMR though
top tips

read the manual

read it some more

then check again

ohh and have a big tube of lube but dont over do it also try to avoid getting on the backcap threads

after a good days play you can either leave it till next time or give it a nice clean and relube normaly every 4k balls relube it again but prefer to do mine after each days play
 

Scars

Retired tattooed lout!
I've been biding my time to add my typical chat up line of asking a girl if "i could spit on her bumhole"..... but i thought u would all think less of me :D

Use Dow 33 on your PMR, avoid Dye lube as its a little thick for this country

Lube it every other event u play, think more often & less lube as too much lube can clogg you gun up and slow it down and effect consistancy

Hope that helps
 
G

Gassy

Guest
Dye markers now come with dow33 as standard instead of that hideous green stuff