Shocker trouble

[Chinn]

Hey guys just got a shocker together and it worked and the virtue board was blinking blue so it was eye malfunction so i removed every thing and put the vision back in and then it wouldnt turn on so i finally got it to turn on and then it was a solid blue light and wouldnt let me do anything turn it on or off. so i unplugged battery and now it wont turn on

any ideas? (balf)

Thanks

 

[balf]

Hey guys just got a shocker together and it worked and the virtue board was blinking blue so it was eye malfunction so i removed every thing and put the vision back in and then it wouldnt turn on so i finally got it to turn on and then it was a solid blue light and wouldnt let me do anything turn it on or off. so i unplugged battery and now it wont turn on

any ideas? (balf)

Thanks

Remove the sharp objects from near you. Step away from anything that may cause harm if used im-properly.

 

[chrizwheatley]

Try a new battery

 

[Chinn]

Well this is what happened I installed a virtue board and plugged everything in. It worked but said there was a eye malfunction(flashing blue) so i turned it off and unplugged everything put everything back on and now my board wont turn back on.
everything looks ok and i have tryed fresh batteries and still no luck. Yesterday it turned on and stayed solid blue but wouldnt let me turn it off or the eyes off and was just lit up blue
What can i do?
Thanks
James

 

[Chinn]

Ok my new plan is to get a blackheart board and send it to SP to get looked at. but any ideas will still be valued
thanks
James

 

[balf]

Take the board and solenoid out, see if everything works off the gun, it may be the power actuator isn't reaching the power button or the power button s damaged.

 

[Chinn]

I have done this and it still has not worked. i think it might be the wire going from the noid to the board

any one know where i can get one from?

 

[Big Mac]

i might have one spare - let me just check with someone.

 

[Chinn]

ah that would be awsome i would buy it from you aswell

thanks mate

 

[balf]

Have you checked the board pins for damage, bending etc.

Checked the battery connections are fine, all the upper board is in tact, checked for grip screw damage on the upper board