Cure 2 Bolt Woes

[TheRenton]

Used this for the first time today and it was chopping balls like anything in my etek2, stuck the stock bolt back in and had no breaks/chops at all.
I noticed that the front carved bit of the cure 2 is rather sharp at the tops, could this be the problem? It certainly doesn't work as it should!
Any ideas ?

 

[dextrus]

one of our lads had that problem

He thought it was somethink with his eyes?

 

[mophead]

works fine with me mate . so i doubht sharp edges are to blame

 

[TheRenton]

nope, defo nothing to do with the marker at all other than the bolt and we were using pretty hard paint too.

 

[TheRenton]

works fine with me mate . so i doubht sharp edges are to blame

on which marker may I ask?

 

[sumo89]

did you try changing your lpr, dwell etc settings? The cure2 is lighter so you may need to tune it down.

 

[TheRenton]

mmm, i know its slightly lighter, but i had my dwell on 12.5 and lpr flush.
Like to know what Planets suggested settings are for it

 

[mophead]

i am using an sl at the minute.

 

[TheRenton]

i am using an sl at the minute.

66 or 74?

 

[sumo89]

hope i dont have this problem when mine arrives. Only thing i can think of is faulty bolt, or lowering the dwell. Iv not read about this problem on the nation and you know how vocal they are.