ego7 velocity query

[Rider]

for the life of me i can't get my ego7 beyond 263fps......

any thoughts?

 

[Dusty]

what air system you using?

 

[Stencil]

Check Batts and clean your reg and rammer.

 

[Fish]

are you just adjusting the reg velocity, or the dwell and lpr too?

have you tried cleaning out your reg?

fresh battery?

 

[Tom Allen]

check the exhaust valve for wear.

 

[Rider]

reg and rammer cleaned.

several fresh procells.

only adjusting inline, not tried dwell and lpr

 

[J@mes]

reg and rammer cleaned.

several fresh procells.

only adjusting inline, not tried dwell and lpr

are you turning the on/off Knob all the way in, i remember there being a issue with them pushing the Pin's on tanks too far in

-james

 

[spreadz07]

are you turning the on/off Knob all the way in, i remember there being a issue with them pushing the Pin's on tanks too far in

-james

ONLY on Stakos
If you or anyone else finds that problem with a Stako, you need to take the on/off knob off the oops and put an O ring over the thread. Replace your "knob" (oooo er!!) then the O ring will stop you screwing it all the way in
Nige

 

[Ryan(pb alexandria)]

RIB..

Lube your rammer orings.
Make sure your LPR is flush ie. the nut is flush with the lpr housing.
Make sure that when you turn your oops knob in all the way give it a 1/8th turn out.
Make sure you reset your board to stock settings.

If that does'nt work call Planet.

 

[Lovetone]

erm....clean you inline regulator? !