mini help needed

[trigg503]

can anybody help please, i stripped my mini down last week to clean the eye board and to install my new beoranged bolt and was in a rush to get out and test it out when i put it back together i forgot to (school boy error) screw in both grop frame screws before screwing on the bottle which blew the body from the grips, i cleaned it all up and put it all back together but now i have a air leak coming from the bolt, i have cleanded every part possible checked all the orings and they all appear fine but still the leak can anybody give me any idea how or where to get some help with this problem thanks in advance for any help info received

 

[royanddani]

mini

sorry to here you have a problem with your mini,can you tell me where you got your orange bolt and how much you payed for it
thanks roy

 

[Magic_8ball]

Wind out the velocity adjuster screw, all the way out, til it comes out in your hand, then screw it all the way back in then wind it back out to where it was.

That should fix it

 

[trigg503]

hi royanddani http://www.paint-xtreme.com/pxshop/advanced_search_result.php?keywords=+&categories_id=192&inc_subcat=1&manufacturers_id=7 this is the site postage is 15 euros so works out at about £30 hope this helps


magic that did not work still leah]ks any more ideas

 

[Magic_8ball]

KEE's Mini tech is in America at the moment but when he gets back you could try sending it in to be teched if you cant sort it out yourself. If you're at the NSPL tomorrow, come find me and I'll take a look at it for you.

Failing that, if you're at Brickets Wood tomorrow, speak to any of the storm boys, Jon Bonich especially, and they may be able to help you fix it.

 

[trigg503]

cheers for the help mate cant make it to any of them, any idea when hes back from the states also are you going to be at snetty any time soon if so you could have a look at it then

 

[Magic_8ball]

cheers for the help mate cant make it to any of them, any idea when hes back from the states also are you going to be at snetty any time soon if so you could have a look at it then

Ah right. Hm, I think they get back next week but don't quote me on that. I'll have a word with people for you tomorrow and find out for you. I should be at Snetterton in a couple of weeks yeah, I move into Uni this time next week, so im sure we can work something out

 

[trigg503]

cheers for all the help

 

[royanddani]

mini

if you stripped the gun right down you should be careful you did not lose the very small disc which very easy to lose ,check your manuel . i don,t know if this is the problem but was told not to lose the disc when stripping the gun

 

[Bolter]

Yes this is called the check valve, but losing this would not cause a leak, it would cause severe choppage.

when the main body comes off the gun, there are lots of allen screws to undo to get the eye board out, and the check valve. If you have missed putting in one of these, the gun will leak. How many have you got screwed in? Are there any holes that appear to be missing a screw? You should have spares in the spares kit.