Ego11 velocity

[Teddy picker99]

Hello all. After a break i have returned, i picked up an ego11 off a facebook group but cant get the velocity up past around 240fps. I have tried, 2 different batteries both black/gold duracell, swapped out orings on dart bolt/rammer/both reg pistons (although they was jumbled up ina bag that didnt look like eclipses usual oring package....). Is there something im missing? Chap reckons it was used once since jusPB services it a year ago, but after started lookin into it, the dwell and fsdo were maxed out on the board, so board and regs went back to factory settings with no avail. Thanks

 

[Teddy picker99]

Hello all. After a break i have returned, i picked up an ego11 off a facebook group but cant get the velocity up past around 240fps. I have tried, 2 different batteries both black/gold duracell, swapped out orings on dart bolt/rammer/both reg pistons (although they was jumbled up ina bag that didnt look like eclipses usualy oring package....). Is there something im missing? Chap reckons it was used once since jusPB services it a year ago, but after started lookin into it, the dweel and fsdo were maxed out on the board, so board and regs went back to factory settings with no avail. Thanks

Also solenoid 'appears' to click fine with eyes off, but it did also suffer fsdo, around 5 trigger pulls before it would start cycling properly, but since i replaced orings that seems to have sorted that. also noid adjuster are 2back and 8front.

 

[StewartW]

set your SFRs to 5 & 7 and give that a whirl

 

[Teddy picker99]

set your SFRs to 5 & 7 and give that a whirl

Thanks, il try it when its back together, just in the process of stripping to check the dart kit and cleaning. Do you know what size orings should go on the dart bolt? Thanks

 

[StewartW]

#15 On the front.

 

[Teddy picker99]

Well, even after replacing all orings that i changed before again with my planet oring kit that arrived from justpb today, setting sfr to 5back 7front, also emptying my ninja pro v2 and trying with no shims in, its still the same...

 

[StewartW]

Well, even after replacing all orings that i changed before again with my planet oring kit that arrived from justpb today, setting sfr to 5back 7front, also emptying my ninja pro v2 and trying with no shims in, its still the same...

Can you either list your timing settings. (Dwell etc..) or reset your board back to factory settings for me please

 

[Teddy picker99]

Can you either list your timing settings. (Dwell etc..) or reset your board back to factory settings for me please

Dwell 15.5, fsd comp 5.0, fsd delay 00:30.
Lpr is 2 turns in from flush with lpr body, it will reach 260fps but the hpr gets would all the way out bar the last half turn. Thanks

 

[GRIMLOCK]

emptying my ninja pro v2 and trying with no shims in, its still the same...

Just to clarify, no shims sets output to 350-450psi 3 shims in is 850psi i believe

 

[StewartW]

Dwell 15.5, fsd comp 5.0, fsd delay 00:30.
Lpr is 2 turns in from flush with lpr body, it will reach 260fps but the hpr gets would all the way out bar the last half turn. Thanks

Dwell is low. Standard dwell should be 16.8