hey guys just got myself an invert mini from the site , been looking on the internet and they are on about hp and lp what will be the best for this gun and what is the differance going to make ?
thanks
gaz
thanks
gaz
invert mini
- Thread starter Gary Jones
- Start date
Without seeing what was being said, would guess people are talking about the output pressure of the air bottle's regulator. The Mini needs the pressure to be above 300 lbs psi. Most regs run well above that.
Unscrewing the bottle becomes more difficult with a higher pressure bottle reg. You can get round this by adding Empire's Axe ASA (£74 new) or a threadsaver from NDZ from America (£30 ish).
Unscrewing the bottle becomes more difficult with a higher pressure bottle reg. You can get round this by adding Empire's Axe ASA (£74 new) or a threadsaver from NDZ from America (£30 ish).
I use hp for my mini. imagine trying to wear your own gall bladder as a hat, thats how hard it is to screw on your bottle... Hope that helps. X
nonsense, ran mine on hp for a couple of years, just screwed on and screwed off. No big deal in my opinion.
Please though, DO NOT put any oil near your air system no matter how much people say "its fine, will make it easier to screw on and off" oil and high pressure air = big fire, maybe explosion. And Im sure you like your arms/face.
Please though, DO NOT put any oil near your air system no matter how much people say "its fine, will make it easier to screw on and off" oil and high pressure air = big fire, maybe explosion. And Im sure you like your arms/face.
Gary, I've used LP and HP on the mini you're getting, both run fine.
Where possible, just dry fire as you're unscrewing the bottle and you'll be fine.
Where possible, just dry fire as you're unscrewing the bottle and you'll be fine.