X7 No air

[fella]

Fit new power tube and its not even gassing up now.Moral of story don't buy guns that need fixing lol.

 

[GRIMLOCK]

So you screw on the tank and nothing at all happens? Or the gun doesn't pop the poppit seal and shoot?

 

[fella]

Screwed the air on and nowt happens.

 

[BOD]

If nothing happens, either your bottle is empty or it's not screwing in far enough or there's something wrong with the ASA.

 

[fella]

Asa maybe but before changing the power tube it did gas up.

 

[BOD]

if it gassed up before then it won't be the ASA.

 

[Spydercam]

Screwed the tank on and it doesn´t made a short pfffft ???
Or screwed in and cocked the hammer and shot and nothing happens ???

Is everthing installed right ?

http://paintball-team-roterbaron.de/technik/tippmann/Tippmann-X7-Response-Trigger-Manual.pdf

How noob you are ? It´s much harder to explain to a noob which is also not good in mech skills !!!

You´re welcome !!!

 

[fella]

It makes a noise when air bottle is screwed on then nothing.I watched YouTube tippmann videos before I started anything.My divers bottle is only topping up to 1800psi would this make a difference? I only use pump guns normally this is my first non pump.I am new to fixing but have sorted three pump gun repairs so far.I bought.

 

[GRIMLOCK]

silly question, have you adjusted the hpr at all?

 

[Tom]

My divers bottle is only topping up to 1800psi would this make a difference?

As long as the paintball cylinder pressure is higher than its regulator output then it should operate fine

Old school output was around 800psi
More common now is around 600psi
Less common but possible is a low pressure output of 200 or 300psi