Wanted: Bob Long G6R 2012/11 or Victory v2
- Thread starter WildWayz
- Start date
hahaha 
Can't wait to try it out YPC walkon, here I come!
Oooh gotta remove all shims from my reg now to make it 450psi!
Can't wait to try it out
YPC walkon, here I come! Oooh gotta remove all shims from my reg now to make it 450psi!
Last edited:
nope just get yourself an slp reg! honestly, i saw a vast improvement after i did! went from 1500rds on a 3k fill to 1800rds.
or if you'r gonna be a cheapskate cause you spent all your monies on the g6r, rap4 do an elop guerrilla myth reg outputting around 250psi for about £30. job done.
or if you'r gonna be a cheapskate cause you spent all your monies on the g6r, rap4 do an elop guerrilla myth reg outputting around 250psi for about £30. job done.
It's more a case of I have 1 bottle which needs to service my Etek4 .50cal setup too.
Unless an Etek4 will run on SLP? (Doubt it - however, with .50cal I have to reduce the HPR down a lot - stock setup was shooting .50cal at 450-500fps!)
Unless an Etek4 will run on SLP? (Doubt it - however, with .50cal I have to reduce the HPR down a lot - stock setup was shooting .50cal at 450-500fps!)
Scrap that - used my noggin and called PE support - the chap on the phone said the SL3 regulator should work fine with the SLP regulator - especially as I am not using a high ROF AND a lower HPR due to it being .50cal.
i thought that might be the case but didn't wanna commit to advising that and look the fool if i was wrong