Welcome To P8ntballer.com
The Home Of European Paintball
Sign Up & Join In

Velocity spikeing

WildWayz

The Moose God
Dec 19, 2004
1,695
507
148
46
Batley, Near Leeds
paintball.moose-shack.com
Will probably cost you to get it fixed.

I'd reset the board to default. Remove bolt and wipe off the lube. Re-lube it so it looks wet, not caked in the stuff. Try ANOTHER battery, just in case.

Do you have a barrel kit? Maybe try matching paint to barrel?
What model GEO is it? Geo, Geo+, Geo2, Geo2.1?
Is it Dark Sports? How much was the paint?
Is the bottle screwed in correctly, or too much ie air starvation?

Usually PE markers are simple to fix.
 
  • Like
Reactions: Gary Jones

Care_Bears

Bluey .. ... ...Teams :- Care Bears UK
Jul 7, 2007
1,791
598
148
Wiltshire
after several boxes of paint going through , all Planets regs need a strip down , cleaned and re-lubed then put back again, If you notice on several occasions you`ll see a post saying " I can`t seem to get past 240 on the fps ". THAT`s usually the problem. anyway glad to see your up and running again. Got to say the guys on here were spot with the advice . Nice post Wildways
 
Last edited:

gommie404

gommie404
Sep 29, 2008
343
96
63
london
and still no one has asked what size paint is was compared to the barrel,, how old was the paint did you size it, ect ect ect..

we have to start with the most basics here,, if your paint is smaller than the bore of your barrel,, then your crono readings will be all over the place,,
time for a freak back or some such,,

i make custom barrels with half size inserts to get rid of this problem..

even my sp1.. with a sized barrel to match paint runs 279 275 278 280 273 ect ect,, size your balls and use that size barrel,,

if you cant,, then when you get to the game in the morning,,walk around the other players and ask to see there paint,,, then chose what paint your going to buy as its the paint that fits your barrel,,

this is the most basic and simple stuff,,, that all of us should be doing,, and im suprised only one person picked up on it,, strange,,

not a put down or a moan,, you know me by now,, but this is really basic stuff,, all paint changes size from box to box,,
even the same box,, will change size as the day rolls on,, cold in the morning hot in the after noon,, if you see what i mean,,

HOPE this helps,, and should see your marker running much better,,, by the way a small tiny bit of air at the feed neck means your paint was to tight,,and you where getting air rebound,, its normal if you dont have a sealed barrel or breach oring,, to seal the bolt into the barrel at point of fire,,
 
  • Like
Reactions: Care_Bears