TRADE only, empire axe, olive/black

[Teddy picker99]

Hello, right, just putting this out there to see if anybody is bored of their current marker or fancys a change...
Im Only after a trade, i dont want a marker worth less than an axe. i realise axe's are kind of 'two to a penny' at times but mine isnt your standard colour scheme, i have two axes, the other is black and i part swapped the original 'earth' to the black.
I have owned this from new, not long after they came about. It comes with everything it would new (obviously not warranty), it has no leaks, it will occasionally hold pressure for a few minutes after its degassed (but this is not uncommon, or affects performance), its cleaned and lubed before and after a days play, it has a couple of tiny blemishs on the anno which i can pitcure if they even show on my iphones camera. If someone i know on here see's this post i would hope they agree with how anul i am about keeping mine an others markers clean and working, but if you EVER get a problem you will have my number to get hold of me for advice/help. Also has the shockwave board and the tape round the grip frame is purely to stop my finger rubbing, its self amalgamating rubber tape so it doesnt leave a mark.
Enough chat heres the pictures..
Ps, NO vanguards.

 

[Donk]

My axe did that & eventually the on off stopped functioning (after a year or so)
John Sosta of Kee fixed it & it's a really simple fix!

Look in the back of the asa & you can see the brass fitment has 4 holes in it. Get your hands on a pair of "circlip" pliers insert then into two of the holes & turn counter clockwise 2-3° and it will behave properly

 

[Donk]

My axe did that & eventually the on off stopped functioning (after a year or so)
John Sosta of Kee fixed it & it's a really simple fix!

Look in the back of the asa & you can see the brass fitment has 4 holes in it. Get your hands on a pair of "circlip" pliers insert then into two of the holes & turn counter clockwise 2-3° and it will behave properly

 

[Teddy picker99]

Thanks donk, my other axe does it regularly so il try it on that. X

 

[viper2k5]

Also try a lil bit of grease (hater sauce or dye slick work best) on the pin should work then mate I don't think I have to tell you don't use oil lol

 

[Donk]

Also try a lil bit of grease (hater sauce or dye slick work best) on the pin should work then mate I don't think I have to tell you don't use oil lol

erm do not use grase r oi o compresed air....

google the resuls

 

[viper2k5]

I was told that of a kee tech not inside and just a little worked for me

 

[Donk]

who told you to do that?

 

[viper2k5]

A tech at kee action sports my Asa was sticking he told me to grease the thread and put a tiny bit around the pin worked aswell

 

[Donk]

Sorry I should be more specific...

Which tech told you that? Not that I disbelieve you, I want to ask why they are giving contradictory advice & which is correct.

I was advised no lube of any sort as there is no secondary filter to stop damage to the solenoid & the ASA is not user serviceable. We were a Kee sponsored team & I was shown how to tech all their equipment by John Sosta their UK based design improvement engineer.