Timmy problem

[GSuperstar]

When airing up my timmy, everytime the trigger is clicked/pressed it takes about 1.5 secs to actually fire, and upon walking the trigger, it doesn't pause for 1.5 secs then continues the amount of time you've walked the trigger, but just fires after longish intervals.

Any advice on what's wrong and how it can be made better

Cheers

Tom

 

[le-pig]

your eye is not detecting paint m8,if your dry firing turn of the eye

 

[GSuperstar]

mate, i'va just this second realised that an about to post it up to try and make me not look stupid but no, too late, lol.

cheers for the help anyway

Tom

 

[PaintballBudgie]

Don't worry mate, I bought one off Yankee Andy at Campaign 2 years ago. I took it back and suggested it didn't work properly.

Didn't I feel a tw@t!

 

[GSuperstar]

lol, i can imagine. Just outta interest, don't suppose you know how to turn the eye on and off on the GZ Timmy do you? It don't say in the instruction manual i've downloaded i don't think

Cheers

Tom

 

[PaintballBudgie]

Sorry if it doesn't have the LCD I am not sure.

Try PMing Beaker or Sypher (Jon from Pheonix) both good Timmy tech type guys.

 

[Mr_Toads_Wild_Ride]

what board is it mate was or sob? I have both manuals in PDF somewhere? leave an email address and will send them when i find um other wise just visit

www.boblong.com for manuals

 

[Dark Warrior]

Tom
doen't Neill know
You know what a tart he is

 

[Beaker]

With a GZ when you turn it on the LED flashes green, hold the bolt forward (or jsut block the eyes) and fire 3 shots, the LED will flash red at each shot (saying the eyes *might* be faulty) and then after 3 shots with the bolt forward the LED will flash Orange and the gun will be limited to 12bps with the eyes off.

So don't epext the gun to be super quick with the eyes off, it's limited to 12bps as the idea is if you got a chop it's limited to keep with the loader.

I think both the SOB (which you are likely to have) and the WAS board (if you open the grip and it's a blue PCB it's WAS) use the same LED sequence for the eyes.

Once the eyes are off you have to turn the gun off and on again to reset them, you can't turn them on.

 

[Mr_Toads_Wild_Ride]

Originally posted by Spankster no.1
When airing up my timmy, everytime the trigger is clicked/pressed it takes about 1.5 secs to actually fire, and upon walking the trigger, it doesn't pause for 1.5 secs then continues the amount of time you've walked the trigger, but just fires after longish intervals.

Any advice on what's wrong and how it can be made better

Cheers

Tom

Sounds like its a SOB in delay mode you need to change the dip switchs on the board to put it on the 1ms bip mode.

I would just ditch the SOB as it is the biggest piece of sh*t i have ever used and buy a was board.

ever since the we hate jim drew campaign you can pick these boards up on the PBnation classifieds for about $75 bucks. Great product and great service