the wright combination

[2scoops]

voodoo bolt 488grams
eclipse titanium hammer 366grams
stock ram 255grams
cool pin 108grams
grand total = 1217grams is'nt this spot on to the ideal weight of 1200grams

 

[Silentbob]

Lighter bolt

= faster cycle

Heavier hammer = bugger all difference.

Just go for an eclipse SS hammer kit, and you will be sorted

 

[NulodPBall]

ummm...I'm assuming that increasing the LP reg to compensate for a less than ideal hammer/bolt combination is not wanted?

Ray

 

[Silentbob]

Definately no

I have seen even a Ti hammer snap when this is done, titanium is big and clever when used in the right environment (my phone for instance or a Ti Boomstick) but its abrasive nature makes it unsuited to an application where it has to move against another metal/itself. I am sure that - when well setup - a Ti Hammer will last the distance, but I would recommend for your setup either a Brass or Stainless hammer kit.

 

[Jamie]

if you want uber light internals then the best setup would be

1, Voodoo bolt
2, Derlin pull pin
3. Titanium hammer and Ram

And if you want light internals one othe piece you'll be needing to keep it consistant and running smoothly

4, LPR

Well thats my opinion anyway and my setup, which runs consistantly smoothly and with very little kick.

 

[elrikos]

i used my eclipse impy with a titanium hammer and shaft and a cut down delrin bolt without any problems at all. i have a feeling that although the titanium hammer is lighter than stainless it is still marginally heavier than the alloy one (felt like it to me anyway)
rich

 

[2scoops]

anyone know stock dwell setting mines 6.5 is this standard or are they all different even as stock

 

[Jamie]

they will all be slightly different there is no right or wrong setting, how did you get 6.5??

 

[elrikos]

think it has to do with the cricket board. each chirp is 0.5 dwell. could be wrong tho
rich

 

[2scoops]

thats right, everytime you press the dwell setting buttons a chirp is heard(imp only 2 months old from sp)
so with a range of 4-14 milliseconds its possible to work out the dwell setting. Each press of dwell button = .25 increment