stripped screws, drilling and tapping the only way?

[Tom Allen]

what diameter is the screw, roughly

 

[Gups]

Jon, just a thought...if the head has come off completely why dont u remove the other screws that hold the board on, then lift the board off over the screw with the head missing? Then maybe u can get little pliers on the shaft of the screw that is sticking up and twist it out??

 

[L J]

gups, there isnt enough of a shaft left to pull!!

Tom,

well there is 2 screws, one is for the grips, prob about 4/5 mm across

the other is for the cricket board, which is about 2/3mm across

 

[joe bob]

let somone who knows what ther doin do it, I had the same prob and somone told me to take a hack saw and cut a grove then use a flat head screw driver

didnt work...

 

[Tom Allen]

shouldn't be to difficult.

 

[L J]

cool thanks again

 

[Philip]

Get a dremel with the smallest drill bit, drill into and then get an allan key/non round piece of metal and epoxy it into the hole, leave to dry and use some grips on the metal to twist it out.