Speed : hp or lp flow???

[Pureball]

lol then what the hell could the problem be. it only chops at high rof. the chrono is all over the place

 

[John C]

Originally posted by Pureball
lol then what the hell could the problem be. it only chops at high rof. the chrono is all over the place

Originally posted by Mark
You need the High Pressure version of this regulator

Originally posted by John C

So even though you have a low pressure gun it works with the HP max flow.

That clear enough???

 

[Tom Allen]

Have you thought about your hopper, you may be out shooting it.

 

[John C]

Originally posted by Tom Allen
Have you thought about your hopper, you may be out shooting it.

Surely sensi would stop that!!!

 

[Tom Allen]

Originally posted by John C
Surely sensi would stop that!!!

Depends on the sensi mode, 1 and 3 yes, 2 and 4 no.

 

[John C]

I reckon its his air system anyway...

The LP Max flows are meant to vent at 280 PSI which is a bit too low for a speed...

 

[Pureball]

yeah isnt the speed supposed to have 400 or something?? had the pressure tested and it was around 280 or so. even then i was told the pressure was too low for the speed.

so i just need to get the hp reg or something then?

btw there was no way i was out shooting the hopper. the eggy y board feeds around 18 bps and my mrof was set at 18 aswell. besides i can only get around 10bps the way i fire.

 

[John C]

You can get a different spring set that alters the output pressure.



I think you should go for a preset though, you dont really need an adjustable.


Remember its a Low Pressure Preset you need, which gives out around 450 PSI.

HP presets give out 850 which is far too high unless you mod your mini reg....


Confusing, I know. Its the numbers you should work from, not HP or LP...