Smart Parts Techs

[zxr]

Velocity dropoff during rapid fire.
· Replace the battery.
· Clean the vertical regulator (most common) and the LPR.
· Clean and regrease the firing assembly and solenoid.
· Increase the LPR pressure and/or dwell setting.

this is taken from http://www.zdspb.com/tech/mguide/nerve/trouble_pneumatics.html
Worth a look

 

[Demonic69]

dwell?

Only for short periods of time, then I pick myself up and go shoot something.....
Of course I've checked the dwell
Tried everything on ZDS apart from lubing the solonoid..... Might give that a go.
Any other ideas please lemme know, or if anyone has a spare Nerve LPR I could try to...

Cheers

 

[smudge1989]

listen really carefully to it see if its leaking on the inside

 

[Demonic69]

It is aye, changes pitch when I move the hammer too

 

[smudge1989]

Right, if you havent already buy the Smart Parts Hose Kit and the Smart Parts Seal Kit from http://www.fatbobspaintball.co.uk/acatalog/Ion.html and replace all the hoses and o-rings, this should sort you out

 

[Demonic69]

Dunt have hoses mate, it's a Nerve
Could indeed be a seal I suppose.
I can't seem to get the Hammer assembly apart though and really don't wanna risk damaging it with brute force (lessons learned )

 

[smudge1989]

K I aint too familiar on the nerve lol, take it down 2 your local site if you haven't done already because there should be a marshall down who knows how to do it.

But yer it does sound like a seal.

 

[Ginja]

chuck aload of teflon (PTFE..PFTE...one of the 2) tape around all the seals. Mate had a few leaks from banjo's, QEV's and such, used a load of tape and doesnt make a noise now.

 

[Demonic69]

No Banjos or QEV's on a Nerve either
Most likely a seal in the hammer assembly I reckon now ( Thanks Smudge)
Will try to dismantle and replace. Got a seal kit from Punishers luckily