Shocker ups

[Robeenio]

*cough* evolve internals *cough*

sp copied and ripped evolve off after working with them to make their own low pressure shizzle!

evolve internals are well german doughnut (berlinger!)

fair enough i am sponsored by them but i wouldnt say they were good if i didnt think they were.




*these are my views not of the entire team yall*

 

[Scars]

most people who have upgraded their bolt have gone Evolve - and that aint just sods law either - makes marker hell of a lot more consistant. also Peegee never charged me 4 looking over it after tourneys or little things i was concerned about (beat that SP)

Evolve you got the service and the A* Parts

 

[Hairbear89]

The Evolve bolt it top quality, the only down side of it is the break in time. Takes something like 5 boxes to break in.
Man places say that when you get the Evole you should set the dwell at 35 beeps, that's crap (as I found out yesterday). I had to max my dwell befor it started firing nicely. Only down side of that though is that it's going to eat air. But after you feel it's broken in, slowly take the dwell down by a couple a beeps a time until you're getting good shots and good efficiency

 

[charlie11]

shocker operating pressure

what is the best input pressure to be running a shocker at when it has a evolve bolt and front grip regulator??
i recently got one and im not sure about using a hp reg in it.
charlie

 

[CAMPBELL]

just go to http://www.evolvepaintball.com and buy everything i did....

 

[peegee]

Originally posted by sykesg
Upgrading a shocker .. sweet


DON'T get evolve internals. Sometimes they're really good sometimes they're really bad. Get the sp efficiency internals. Also you may have all kinds of warrenty/cost problems if your marker plays up and you give it SP to fix and you have an evolve bolt.

You don't need the LPR

G
London Tigers
Shocker King

Yeah the first batch of evolve bolts were inconsistant that is because we were using oring supplied by Smartparts.

As for the BS on warrenty if your gun breaks because of the board then the bolt can have nothing to do with it and they HAVE to warrenty it and the BS about the evolve bolt runnig to high a preassure to blow your solenoid we run inbetween 180 and 210 these just happent to be preassures sp quote on the shocker spec. The bolt cannot blow your solenoid the reg is the only thing to do that and if sp dont supply a lpr or a device that will blow off before over preassurising then that is something they should sort out.

Dont believe the HYPE or SP propaganda (ie sponsored players)

read the cold hard facts on the related technical forums.

Peegee

 

[Robeenio]

Originally posted by peegee
Yeah the first batch of evolve bolts were inconsistant that is because we were using oring supplied by Smartparts.

As for the BS on warrenty if your gun breaks because of the board then the bolt can have nothing to do with it and they HAVE to warrenty it and the BS about the evolve bolt runnig to high a preassure to blow your solenoid we run inbetween 180 and 210 these just happent to be preassures sp quote on the shocker spec. The bolt cannot blow your solenoid the reg is the only thing to do that and if sp dont supply a lpr or a device that will blow off before over preassurising then that is something they should sort out.

Dont believe the HYPE or SP propaganda (ie sponsored players)

read the cold hard facts on the related technical forums.

Peegee

straight from the mouth of the low pressure god!

amen brother!

 

[bruce]

/\/\/\/\/\

what both they say

our shockers used to rip with the Evolve internals, our angels also now do. Plus one of the best customer relations team in the business you carnt really go wrong with evolve

just my opinion

bruce