Screw problems

[wiggywan]

hey does anyone know what screws to use and where i can get any to attach my angel air to my IR3??

 

[Parksy]

They normally come with drop forwards

 

[Gyroscope]

gotta be 10-32 then

 

[le-pig]

wdp,if you use screws that are to big you will screw your board

 

[GSuperstar]

did anyone else see that title and expected to see someone having sexual difficulties

 

[Sean Diamond]

did anyone else see that title and expected to see someone having sexual difficulties

Yeh, i was half expecting to have to give a kind reference to the 'lubrication' thread below, that might help...

 

[GSuperstar]

Originally posted by Sean Diamond
Yeh, i was half expecting to have to give a kind reference to the 'lubrication' thread below, that might help...

lmfao, i just kept expecting to see the word 'impotance' every where

 

[Tom Allen]

10/32 unf, 1/2 inch long. If you can't get them try 5mm dia x 13mm long. They are not the right thread but they will go in.

 

[ChrisWhiteSTEL]

You have to remember these are weight supporting screws, so you dont want anything thats loose or a bad fit. Having an AIR mounted like that with its ability to hinge could cause problems without the proper screws.

Phone WDP and grab some!

 

[Tom Allen]

it is best to get the right bolts, with the right threads, and 10/32 unf x 1/2 inch long are the right bolts. As i said 5mm bolts will work, and are actually tighter than the originals, but use the 10/32 unf bolts.

I have bolts if you need them, pm me your addy and i'll send them to you.