ReMoVe PlEaSe :D

[Aphex]

It will be one of 2 things either the cup seal or a ring has gone on the ram, if you have a spare piece of macro line use it like an ear trumpet to see if the leak is coming from the small hole under the breech block, if it is then it is the cup seal may be a bit of dirt may be knackered, if not it is the ram o ring nearest the hammer

o-rings look fine,

what the cup seal?

Thanks

Tom

 

[Aphex]

oh and by the way..

by pi$$ing air i mean like emptying the bottle in a few second [about 10]...

all the air is rushing out of the feedneck

 

[Kitch]

Cup seal is what the hammer strikes to release the air, sits inside the valve guide, have a look in the manual mate

looky here

http://www.wdp.tv/manuals/a4_manual/26.htm

The cup seal is sat next to the spring and fits into the valve guide

 

[mikey601]

Pm tom allen

 

[Aphex]

ok thanks mate..

ok ill try that now

Thanks

Tom

 

[Kitch]

Under the volumiser/end cap (the one on the left as you look at the barrel end) remove the plastic spacer and spring and the cup seal should then just fall out when you tilt the gun

 

[Bob]

Please post this stuff in the techroom, its what its there for. Why put it in Newbies?

 

[Aphex]

Under the volumiser/end cap (the one on the left as you look at the barrel end) remove the plastic spacer and spring and the cup seal should then just fall out when you tilt the gun

Fixed now...

Thanks a lot mate..

I could ki$$ you....but ill leave it

Thanks for everyones help

And sorry 'Bob' didnt think i would get a reply in time if i posted in techroom

Tom

 

[Kitch]

No worries mate

 

[Bob]

And sorry 'Bob' didnt think i would get a reply in time if i posted in techroom

No need to apologies bud, just for future reference