Reduce EGO kick

[Parksy]

Originally posted by rentonc
can I then just lower the fps by normal means (front reg)

Indeed mate... like I said just use the inline reg (not the lpr) to do your fps as normal!!

This is 'meant' to make the marker a little less efficient. But to be honest there that efficient anyway does it really matter?

 

[Lovetone]

egos rock

 

[TheRenton]

Originally posted by Parksy

This is 'meant' to make the marker a little less efficient. But to be honest there that efficient anyway does it really matter?

Doesn't matter to me, currently it will shoot about 10-12 pots on a 1.1L bottle, so i'm happy with lowering that figure a tad!!

 

[swave_gav]

here is 1 for you if you want no kick, unscrew the lpr cap remove the internals from the cap, take the 2 springs and switch them around, put back to gether, up the dwell to about 9.5/10 the up the hpr and adust to soot the fps desired, your ego will not kick at all nothing nada, the problem is now your cannon is a gas hog and the eff id well down so only for front players etc

 

[ginge2000]

star frame and trigger

my team mate jay from devastation had a star frame put on his, as did i, i did the settings and he was pushin 22bps an i was gettin 18bps,, marshals tryed to get it to bounce and they just couldnt, if you want the settins let me know

 

[KOHI]

post them up buddy

 

[Gyroscope]

Originally posted by John C
100psi sounds a little high.

For example, a timmy (practically the same gun) should cock at about 60 psi.

Obviously a higher LPR will give you more kick and more trigger bounce, but lower it too much and you will get drop off.

I agree, it does sound high. Then again, the area of the ram piston face matters a lot to LPR pressure in a paintball gun. The LPR pressure doesn't tell you much about the force of the moving bits without that detail. Still, I wouldn't think the "rammer" would be that different in size from a Timmy ram.

 

[Lovetone]

sounds like bounce ginge but if you can get past the judges why not

settings will always depend on your trigger anyway so theres not that much point posting settings up cos one mans gold is another mans rubbish.


start at band 75% and ttol 8% and work from there, then adjust the pull and release to get rid of the bounce...thats what i was told anyway

 

[TheRenton]

I might just try and get one of the nexus or pheonix techs to look at it next time I see one
I don't mind understanding a gun, but I hate fiddling, i just wanna shoot it.