Welcome To P8ntballer.com
The Home Of European Paintball
Sign Up & Join In

realoder help

Potter Loki

Well-Known Member
Mar 18, 2007
1,305
120
88
Essex
edit: so now its packed up completaly, tried loads of diff duracell batteries and the thing wont turn on, wires arnet pinched or anything, anyone got any ideas?
 

Jakey C

Jake Cross
May 28, 2006
341
1
28
wirral
Could be the little clip inside which catches on the other bit underneath (bit which connects to the motor, Forget the name)
Take the screw out the middle of the drivecone and remove it pulling it upwards, may have to wiggle it a bit, Look underneath, There should be a little bit of plastic about 5mm sticking out. If there isnt, buy a new drivecone or if you can be bothered, try putting a screw of somthing similar were it was :rolleyes:
 

Potter Loki

Well-Known Member
Mar 18, 2007
1,305
120
88
Essex
nah that bit is there mate, i think its just where the drivecone spins then gets infront of that small clip, which has to then like catch the spring up
 

Beaker

Hello again
Jul 9, 2001
4,979
4
113
Wherever I may roam
imlr.org
If might not be assembled right, if it doesn't have a lot of tension you might have got the tab the wrong side of the one on the catch cup. You need to cross the two arms on the spring over the bottom tab so there's enough tension.
 

Rich ECI

London ECI.
Nov 10, 2006
173
0
26
Mine has dont this before, all i did was completely take apart the hopper and re-assemble it, worked for me,

Rich