Well this be my problem
Have proto was working fine, bought Evolve PI reg and ultralite frame fitted both now no wanna worky!!
firstly i have checked the solnoid everything looks good still clicking
replaced battery
cleaned lpr
refilled bottle
put bottle in asa and air pissed down the side of the asa it had munched the o-ring so replaced and tried again
reattached bottle heard it air up turned on marker turned off eyes and nothing!!
took off bottle checked all board connections wires etc stuck finger down feedneck eyes worky fine
reset both evolve pi and lpr to 0psi and 25psi respectively and reconnected bottle and dialled out lpr to 75 psi and then started to dial out pi reg pulling trigger each time after adjustment nothing at all untill a leak down the barrel started checked manual replaced said o-rings re assembled and now nothing again the marker airs up then nothing happens
advice please
regards
Snooz
