PM7 efficiency

[uther313]

iv dropped the dwell and will be playing on sunday so will see if that helps. cheers for all the advice also trimed the ends of the macro line to make sure its got a flush fitting and checked alll the orings. seems to be be fine and cant hear any leaking. so hopefully its just the dwell

 

[red dragon]

Dont forget if your playing indoors sunday the temperature will b different plus you will b useing re balls so it mite not give u a true reading?

 

[Andygoth]

Not really sure where you are coming from there Andy?

it says 0.68L at the top not 68ci. I was working on .68L being a lot smaller then 1.1L
So I'm assuming it's a small sized tank and 500 shots isn't that bad from one of that size.

 

[Ash - GI Sportz]

Hi

You should also try replacing the 009 o-rings on the tail of the bolt, and the inner 020 o-ring on the back cap (not the very back one)

Thanks

Ash Chaplen
DYE Europe

 

[Gee Tee]

it says 0.68L at the top not 68ci. I was working on .68L being a lot smaller then 1.1L
So I'm assuming it's a small sized tank and 500 shots isn't that bad from one of that size.

Didn't think a .68L tank size was available? So I assumed (possibly wrongly) this was a typo and size was in fact .68ci or 1.1L

I've seen 0.7, 0.8, 1.1 and 1.5L fiber wraps - but not a 0.68L

 

[uther313]

its 0.7L my bad

 

[Gee Tee]

No worries Uther, still think only 500 shots to a 0.7 L fill is a bit low though

I've got a 0.7 L I use on pump days - may try a test on my own PM7