Welcome To P8ntballer.com
The Home Of European Paintball
Sign Up & Join In

One for the SP techs.

Tom Allen

TFP
Jul 4, 2003
8,196
123
148
Cardiff
Originally posted by Fly
Air up and push the little orange button, this will tell you if the noid's ok... if it fires then re-check your wiring and connection's, If not it's foooked
That only tells you if the air feed is ok, it's the signal that's not getting there.
It's easy to do, just touch the noid pins to a pp3 if it fires the board is at fault, if it doesn't it's the noid.
 

Tom Allen

TFP
Jul 4, 2003
8,196
123
148
Cardiff
pp3 = 9v battery.

Take a pair of wires straight from the pp3 9v to the solenoid terminals, and touch them once.
If nothing happens, the solenoid is shagged. If it fires the problem is board related.
 

Tom Allen

TFP
Jul 4, 2003
8,196
123
148
Cardiff
The coil can't normally be repaired, but they can be replaced. I've bought just the coil for angel solenoids. I need to see the solenoid to source the coil.
Can you put up a pic, or send it over to me..

i2i@ntlworld.com
 

Tom Allen

TFP
Jul 4, 2003
8,196
123
148
Cardiff
There is no way to repair the coil on a solenoid, it's a sealed item.

Well that says it's made by parker rather than humphrey. there will be info on one side of the coil, relating to the coil. This will tell me the model of coil it is, as there are many.
 

Dskize

I Would
Dec 6, 2004
4,341
300
118
50
Duntryin
ive got a leaky noid you can have bud its the same type as yours and you can swap the appropriate(sp) bits either send it back to me or il send you the other noid.