Offered a broken gun

[ollgeeze]

he dont have the net so

lol if i cant work it out im sure it will be on here soon lol

Pm me first if you decide to sell wont you bud i love fixing dushed markers, just sounds like either the valve seal or one of the rammer sleeve orings is damaged.

 

[lukesteele]

i will pm you for some help if ya dnt mind first cuz it sounds like you know what ya on about

 

[Rosie]

when you get it run some air through it, and find out exactly where the problem is, and post it up on here; there are a lot of people who own timmies who'll help

is there a factory reset option on the board, is there a chance he's messed with the settings & buggered it up that way?
Otherwise go through the marker and strip it, and replace any broken o-rings, and lube & clean it all to start with; then go from there.

 

[lukesteele]

thanks rosie will do

 

[Tom37]

if i do have to change the o-rings where can i get a full set from so that i know that it isnt the problem

just go to the plumbers and get them cheap

 

[lukesteele]

right i picked up the gun and air leaks out from around the white ram thing at the top of the gun.

It is a 2k2 timmy aswell

 

[ollgeeze]

White ram thing??? do you mean the bolt? take the bolt out and put your ear to the feedneck, if the leak sounds close by then its your valve seal or the forward rammer sleeve oring like i mentioned before, or there is a small possibility its the valve spool oring. PS: make sure you dont accidently fire it while you have your ear to the feedneck!

you can determine whether it is the valve spool oring or not by turning your low pressure off at the regulator, if it stops leaking with no lp pressure then you know its the spool oring, otherwise its the seal or the sleeve oring. You have to get the front off either way.

 

[lukesteele]

got it out now is there supposed to be 3 or 2 o-rings on the bolt????

 

[ollgeeze]

The amount of orings on the bolt has nothing to do with the leak mate, dont worry about that, just see if you can pinpoint the leak with the bolt out. listen down the feedneck with the bolt removed.

 

[lukesteele]

well one of the o-rings were missing but it has drank all of my air it has took 1500 psi in the space of 5 mins