My new setup
- Thread starter Dr_Chris
- Start date
Looks good mate.
Get yourself some QEV's tho mate...double quick...that looks like a Nexus 44 ram on there, so they go on a piece of cake...set your CDEL to 006 and your good to go faster!
And a Samurai!
Get yourself some QEV's tho mate...double quick...that looks like a Nexus 44 ram on there, so they go on a piece of cake...set your CDEL to 006 and your good to go faster!
And a Samurai!
I would also turn your bottom rail the other way, it will bring your bottle in a lot tighter and make access to the on/off a lot easier. You would also be able to make the hose shorter.
Aye thanks guys. I have just finished turning the rail the other way, I thought it looked a bit off 
*hears cries of 'NOOOOB'*
*hears cries of 'NOOOOB'*
anyone remember when their marker was that clean? dont make it too nice or you wont want to do those superman dives
I just worked out how to set it to 006.
How do I make the markers' ROF higher? I put the battery in and it only seems to click a couple of times a second even though I am pressing the trigger more often than that.
How do I make the markers' ROF higher? I put the battery in and it only seems to click a couple of times a second even though I am pressing the trigger more often than that.
QEV's
Samurai Trigger
It looks liek you have a Nexus 44 Ram on there...once you put the QEV's on (makes ram faster), open the brip on teh Eblade...above teh battery is a red button...with the frame switched on, press and hold this Red button, until TIMG shows on teh display...then hit teh middle button on the grip, use top and scroll to CDEL, hit middle button...will be 003 or 004, increase this to 006, hit middle button, then select back until you get to where you started.
any problems PM me
Frame on press and hold top button till it says EYE OFF...frame will be faster to 10.4 BPS if you are using factory fast...if not. I can help you with settings.
Samurai Trigger
It looks liek you have a Nexus 44 Ram on there...once you put the QEV's on (makes ram faster), open the brip on teh Eblade...above teh battery is a red button...with the frame switched on, press and hold this Red button, until TIMG shows on teh display...then hit teh middle button on the grip, use top and scroll to CDEL, hit middle button...will be 003 or 004, increase this to 006, hit middle button, then select back until you get to where you started.
any problems PM me
Frame on press and hold top button till it says EYE OFF...frame will be faster to 10.4 BPS if you are using factory fast...if not. I can help you with settings.
Dont put the rail the other way!!!
Or you will be holding your gun all spasticated with that small bottle.
Some people...
Or you will be holding your gun all spasticated with that small bottle.
Some people...