Mech Bounce on a shocker.

[Ryan(pb alexandria)]

Originally posted by Tom Allen
Board problem

If its a single sided or double sided board, it can be fixed no probs.



Trigger problem

Speed 05's had that problem, and they put a fibre washer either side of the trigger pivot pin, which rubbed the trigger and body slightly, causing a damping effect.

am gona solder the board off the noid and try retrack the line..its just one cut..what would you do john mate? (my soldering is disgracefull)


and skeet...its dye stickies..god damn trigger bounce

 

[Ryan(pb alexandria)]

okay i aint got a clue how to fix this line on the board.

anyone got any ideas?

I will love you long time..

 

[ToxicPaintballz]

Apparently if the board is cracked it doesnt work anymore, call up SPE and see if they will sell you a replacement board if its Humphrey noid, if its Parker noid I think you have to buy a new noid .

 

[steviecarson]

your messing again ryan what have i told you about that

 

[Tom Allen]

Originally posted by Ryan(pb alexandria)
okay i aint got a clue how to fix this line on the board.

anyone got any ideas?

I will love you long time..

Right, get a small flat screwdriver the jewellers type, and carefully scratch about 2mm of the protective coating off the track that is damaged either side of the cut.
Then solder accross the broken joint.

EASY..!!!!

 

[Ryan(pb alexandria)]

cheers tom, gona send it to my good buddy as his soldering skills are alot better .

Thanks

 

[Tom Allen]

you do need to be okay with an iron, as you don't want to overheat the tracks.
I've done this loads of times works every time.
If there's a large crack it can take out quite a few tracks, so it's worth having a good look for other breaks.
There may be a break even if the board hasn't broken, as the tracks will get stretched and have a hairline crack through them.

Good luck.

 

[Ryan(pb alexandria)]

cheers for the help tom