Inferno question

[guppy]

Bunker Monkey!!

2 things....
(1) where d'ya work...? I tried phoning Arrow but they said they'd never heard of that problem...
and (2) Hey! that's MY Robbotar you've pinched! Glad u like it!

 

[Bunker Monkey]

I work at paintball challenge which is near S****horpe.
And cheers for the robotar

 

[Rich S]

try seeing what valve head is in the valve assembly, if a winter valve is in and the temperature is worm then not enough gas is getting through to re cock.

 

[guppy]

Prob Solved

Had a marathon gun fixing day today, managed to sort out about 50 of the buggers! I changed over the valves as suggested which worked for a few & in others i found that the mainspring was a bit knackered so replaced them & all they work fine now....until Saturday! Cheers guys for your help!

 

[Bunker Monkey]

Cheers

I'll tell the site mangare then so i can get fixin 'em (but i don't mind cos i'll get paid )

 

[chunk.Clan]

may be this will help........

I work @ Skirmish Edinburgh and we use infernos. It could be several different problems. 1. Is the gun firing over 300 f/s, so of the infernos don`t like that and just stay forward. 2. Is the valve working properly. When the co2 comes into the valve the valve not only controls the firing but the recocking of the bolt as well. Therefore if the valve is not working the bolt won`t come back.
Hope this helps.
Chunk.

 

[chunk.Clan]

may be this will help........

I work @ Skirmish Edinburgh and we use infernos. It could be several different problems. 1. Is the gun firing over 300 f/s, so of the infernos don`t like that and just stay forward. 2. Is the valve working properly. When the co2 comes into the valve the valve not only controls the firing but the recocking of the bolt as well. Therefore if the valve is not working the bolt won`t come back.
Hope this helps.
Chunk.