help with E2 grip
- Thread starter smartecosse
- Start date
The manule is actualy wrong, as you all can see the sliders dont move as it says.
all you need to do is set the trigger stops so you have as near to zero as poss and as near to 100 as poss when the trigger is pulled and released. ( yes, this means you cant set the trigger silly short )
then adjust the sensitivity up untill it stops bouncing.
also, dont have your cocking pressure stipidly high.
I found the filters worked great then i de-bouncd an E2, think you must be doing summing wrong skeet.
DB
Right..this is from Lord Flash, at Planet Towers...Originally posted by MonkeyBoy
If you find out how to make the TTband sliders move let me know, I have changed the percentage from 0% through to 100% and the sliders never seem to change.
I have set my tolerance to 3% and it still sometimes bounces. Like smartecosse's, mine hardley ever bounces with paint in it, but if I set it to training it bounces shedloads. Knowing my luck its bound to bounce in the hands of a marshal.
.......but it is quick
Dont set the Pre travel too short, with the magnet really strong...as the trigger can bounce off the stop screw.
Once you have sussed your trigger pull...Flash says:
Set the TT band so that the fully pulled and fully released values are outside of the band. For example if the band is set at 80% then this leaves 10% above and 10% below the band, therefore the released value can be anything less than 10% pulled value can be anything higher than 90%.
My pulled value is 97% and released is 3% so, I can set it at the TTBand value at 90%.
Flash Says:
I personally set all triggers so that the swing is 0% to 100%, the return force is average, the TTBAND is at 85% and the TT TOLerance is at 10% (Jack prefers 12%) and that works for most guns.
If the trigger is bouncing off the front trigger stop and giving double-taps - test by flicking the trigger hard - then you should upgrade to the latest version which will prevent this. You can upgrade by either sending in your board, or just by visiting us at any major tourney.
He says that on the most recent versions, the bars dont move..i have 0.19...the latest is 0.24.
Oh...and about fast..yep...done this within Mins!!
Had to put in my sig to get the pic...will remove shortly mods!
Skeets why not just put the pic link up?
http://img.photobucket.com/albums/v245/Skeetmaster/Paintball/CIMG0406.jpg
http://img.photobucket.com/albums/v245/Skeetmaster/Paintball/CIMG0406.jpg
err
Well..probably knowing that Planet like to make sure things are as least as good as they claim...a "Pro Chrono", or "Red Chrono" as many doubting Thomas's call them...would probably say 19 Bps!!