G7 velocity inconsistency

[KitsuneAndy]

I'm getting up to about +-20fps over the chrony.

Time to get the reg serviced? And should I send it off for this, or just do it myself?

I'm confident it's not my air system as it's a fairly new Crossfire preset.

 

[deant]

dude a friend had the same problem with a speed 06 straight out of the box and was told that the reg needs to be well run in with around 1500-2000 rounds through it.

Hope this helps

 

[Bob]

A new reg shouldn't have that large a dif even when not run in, LiPS will service it and it should be okay, could also be dwell problem or rubnish paint match.

 

[Tom Allen]

try a couple of drops of love juice in the fitting under the minireg, and dry fire the marker. May just be a dry reg.

 

[KitsuneAndy]

A new reg shouldn't have that large a dif even when not run in, LiPS will service it and it should be okay, could also be dwell problem or rubnish paint match.

I know its not the paint match as I always match the bore size to my evil pipe kit. Guessing it just needs a service, I'll probably hand it to LiPS at the next round of the masters and get him to service it between rounds.

 

[KitsuneAndy]

try a couple of drops of love juice in the fitting under the minireg, and dry fire the marker. May just be a dry reg.

Already tried that mate

 

[Tom Allen]

Needs a service then.