FS UK: Egg and Reloader battery wires

[Rosie]

Have done Nige

Ok, all the reloader ones are gone, just 7 egg wires left.

http://i62.photobucket.com/albums/h84/92rt095/battery2.jpg

With the egg wires I'll send you a couple of pieces of heat-shrink, and the wires are pre-soldered so you won't even need solder -just heat.
-Put a piece of heat-shrink on each wire, hold the wires together you want to solder, and put them on the hot iron. The solder will melt together, lift them off & blow on them to cool the solder, which will seal the wires together.
Pull the heatshrink over each solder joint, and shrink (not burn ) with the heat from a lighter or cooks torch.

I'm not going below £2, because the work you have to do is minimal really

 

[paintball-lizard]

Mines worked great thans Rosie and have fun at Uni

 

[Fish]

ooooh, go ooooon then can tell when im not going to win this...

paypal addy again please

 

[Rosie]

ooooh, go ooooon then can tell when im not going to win this...

paypal addy again please

How many would you like ?

My paypal is 92rt095@girlshigh.biblio.net

Thanks

 

[Fish]

2 please incase i cock-up

failing that, it means i have one to sell on when they become rare

 

[Fish]

money and e-mail sent ta muchly

 

[Rosie]

All sent out to peeps , hope you got them Ok.

I still have some of the eggy ones left if anyone wants one/a couple .

 

[Rosie]

I've had a few people asking me how to make these, so here we are:

I have no problems telling people at all , so no more offers of begging & grovelling etc, eek!

For the reloader one:
I get them from Maplins
http://www.maplin.co.uk/Module.aspx?ModuleNo=44392&criteria=9V PP3&doy=2m10

39p each, you will need 3 (get 4 to be safe)
You'll need to buy some heat shrink also, just wider than the wires on the connector
http://www.maplin.co.uk/Module.aspx?ModuleNo=301&criteria=heat shrink&doy=2m10

a soldering iron, and some solder.

Get the 3 wires, shorten them all a little, and cut some of the plastic off the ends, exposing the wires.

Solder them together like this
http://mywebpages.comcast.net/c77bronco/9vp.jpg

It's easier, if you get 2 of the connectors, and wire both of the black wires together, and then both of the reds. Put a piece of heat shrink on both wires of the last connector, and solder them together as above. Move the heat shrink over the solder join and heat the heatshrink with a lighter.

I'll probably post that up on the thread actually

PS £2.50 probably sounds a bit steep when the wires are only costing 39p, but I had to buy the heatshrink, the solder, and spend aaaages making them , and paypal fees, and finally postage .

If you have any problems ask & I'll sort it out.

Thanks
Rosie

 

[Blynde]

Wired

Will have 1 for Egg please. Paypal as above yeah?
Regards

 

[figment]

Rosie any egg one's left
please

going to have a go at reloader one . but might be me being thick but in your pic the - is connected to the + and + to - (red to black and black to red ) is that as it is. just me being thick..