Empire axe barrel upgrade

[Bolter]

http://www.paintball-equipment-online.co.uk/product_info.php?cPath=79&products_id=1231

I use these if it helps (they are flippin cheap aswell!) Normally barrels have two parts to them. A 2inc to 7inch part that is the bore size, and the tip which is bigger slightly. The un1tec barrel has the bore size the whole length of the barrel.

Also, if you get one bore size, get 691/693 and you will be able to at least shoot any paint. You can buy smaller bores at a later date if you really need to. They are £30 new, or 2nd hand, anywhere from £10 to £20.

 

[Dusty]

Have a look here http://www.p8ntballer-forums.com/threads/empire-axe-mini-review-and-short-shooting-video.99823/

That was by no means perfect tourney paint, just decent quality training/site stuff and from memory I think it was Sterling. you'll notice that the barrel I used was stock and I found it shot very well indeed. I had a wee play around after the video was shot too, put about another 1000 balls through the gun and had zero breaks and no complaints.

As Bolter says they don't make curved barrels, paint quality is the single biggest factor in accuracy next to your own ability