Ego Solenoid

[Rosie]

Does anyone know if there's a site with an ego pcb schematic on (I've looked in the manual- & what a good manual!! -but it's not in there)
-I need to know where the solenoid attaches to the board (the 05 board; if they're different)

Ta

 

[spreadz07]

hi rosie
try the planet website under downloads
loads of stuff on there
hope this helps
nigel
2hott4u vice president

 

[Dark Stranger]

its a two pin connector on the board (the only one)

 

[rayko]

Anyway, looking at the board with the battery space in the bottom right corner, the solenoid plug is the two prong jobby in the top left.

The eyes are plugged into the four prong space next to it.

 

[Rosie]

That's great thanks

 

[robof9]

http://www.robof9.plus.com/images/noid.jpg

just cos i did a pic i was slow, d'oh

 

[Rosie]

Thanks Robof that's really helpful

 

[robof9]

no problem

 

[Skeet]

How are you getting around the whole shocker loom thing?
Are you using the Shocker noid or a moded Ego noid or what?

What about teh Eyes? As I am sure you are aware...the Shocker noid has a boad on, which teh Eye plugs into, then a loom from there to teh bottom board...I'm curious!!

 

[John C]

I would guess a shocker noid, desoldered from its parent board.

At shocker pressures, the ego noid would be running way, WAY outside its operating parameters. Which means at any minute it could go POP and its new solenoid time.