ego problem

[Friswell_69]

right after just coming home after a days balling i decided id clean my gat and because it was full of **** and grass decided to take it compleatly apart,
so took it all apart cleaned it puting it back togeter now and i cant get the manifold and noid in properly i push it onto the catchy thing then it doesnt want to move farward and when i put the grip frame back on ther is about a half cm gap between the grip frame and the FRM

please tell me how to fix it people as i am going on holl on mon n wanted to fix it and put it all away before i go on hol

chris

 

[Tom Allen]

have you slotted the manifold into the main body as you assembled it.

 

[Skeet]

Looking at the groove running from the front to the back, notice that it widens at the point that the manifold can exit the frame.

You have to tilt the manifold and tuck it into the gap before you slide it forward.

Unless you have something blocking it?

EDIT: Hey Tom, hows tricks!?

 

[Tom Allen]

not bad mate, haven't seen you on here for a while

 

[Friswell_69]

no nothing blocking it and yea its in the groove fine any other suggestions ?

 

[Skeet]

This is true...you know...lack of interesting threads...emergence of an Xbox 360...work...you know...

 

[Tom Allen]

it has been a bit slow recently.

Friswell check the eye leads are not caught, and which ego is it 05, 06, ect.

 

[Skeet]

no nothing blocking it and yea its in the groove fine any other suggestions ?

Well...the noid etc should still be connected to the rammer housing, which you slide in, then angle the manifold, pop it in the gap and slide it forward.
So, is it the manifold not moving, or is it the rammer housing.

It has to go in...so...something isnt right.

Maybe remove the LPR FRM etc, as these would normally go on last anyway.

 

[Tom Allen]

Skeet i've just pulled my 05 apart, and i can't find a way to get this problem.

 

[Tom Allen]

could you have a hose out of position.