Eblade Users...Help with Blaxk Delrin bolt please!!!

[binz]

out of interest what where the settings he gave you??

 

[Skeet]

I seem to remember he said they run theirs around 125 on the EYE setting.
Told heim im getting 240 ish breach open 2220-230 ish breech closed and 010 on the purple paint.
was getting 008 breach closed on ally bolt 240 ish open.
Think my EYE is set at 240 ish, but gonna reduce it down.
I think the problem was i didnt really giv ethe bolt a chance...because it was farting, but that seems to be due to a slightly low cocking preassure!

 

[binz]

might try dropping mine down a bit ,cause mine seems to be missing a beat now and then when fireing fast .
i dont think its me cause on a mates Timmy i can shoot faster and more consistant than the cocker.

cheers Binz

 

[jahlad]

Originally posted by Skeetmaster
How do i get around the fact that my plumbing is sealed, Ie, cant get in anywhere to put any oil in the system after the bottle reg...need a QD?

what ever you do DONT put oil in the fill nipple, it can cause the oil to be pushed into the bottle where it is under extreme pressure and will vaporise....what happens next is very similar to how a derv engine works and explosions inside your bottle are not a good thing.

you should put a couple of drops into your system down stream of your primary reg....best bet is to disconnect one of your macrolines and put it in there or take out your inline reg and do it that way

 

[Gyroscope]

You should replace your back block with this!

 

[L J]

Originally posted by jahlad
what ever you do DONT put oil in the fill nipple, it can cause the oil to be pushed into the bottle where it is under extreme pressure and will vaporise....what happens next is very similar to how a derv engine works and explosions inside your bottle are not a good thing.

you should put a couple of drops into your system down stream of your primary reg....best bet is to disconnect one of your macrolines and put it in there or take out your inline reg and do it that way

thats odd HPAC told to put some love juice in the fill nipple because the valve kept on getting stuck open

 

[Skeet]

Welll...you could just replace it!

Yep...seen those back blocks...is Com gonna be getting them in, or do I have to order from the states?

If I keep pulling my push fit macro hose out will it fcuk it up..coz i thought thats the best way to get oil in.
Havent got them yet but looking into it..have braided steel at mo.