Eblade Users...Help with Blaxk Delrin bolt please!!!

[Skeet]

Guys have got black delrin Supercharger bolt...didnt want tyo work too well in the eblade today...fine with aly bolt, have fiddles with setings etc.
Anyone help me out?

 

[Dark Warrior]

I would think that you would have to adjust the timing due to the Delrin bolt being a lot lighter than the Alloy one

 

[twitchmonkey]

my bro uses a black magic w eblade, he switched to a warped delrin bolt and had no issues, i think you should just need to recalibrate your eye.

 

[Skeet]

!

FCUKING HELL!!!!!!
Well, put the bolt back in..had first proper try with paint...went like ****e off a shovel!!!
I think its coz I was expecting problems..when I switched the gas on..first couple of shots were iffy, didnt want to work...so took the bolt out and put ally on ein..no problems.
But..having switched the gas on and off that day..it did it agin with the ally bolt as well...so, wound the cocking preassure up a touvh..and it went ok.
So...tried with the delrin again this afternoon and was rippin..even with just my revvy.

So..happy now!

By the way.....Torro ball is a very nice paint...the fill on the lower grade isnt fantastic..but the balls are good and fly straight...seem to be a touch bigger than others around .690-.692.
Available from SP apparently...

Next question is....
Underneath the front block is a blanking plug..can I remove this and put a mini guage in there to monitor the cocking preassure?
Can you recommend one..is this a good idea?
Cheers.

 

[TOOLE]

messing with a cocker unseceserily? never do it, it just isn't worth it for gauge, you'de most likely just break it (nothing against you, most people couldn't do it, including me!!)

 

[Skeet]

I have an engineering background!

 

[F3Z]

Skeet if its working now LEAVE IT, at least we can get some paint through her now without all the **** you had on saturday. Hey and ifs shes ripping now better give it to me, ill put it to good use!! Hey and if you wanna gimme some free paint too ill take that. .o0(hmm and while im in this fantasy land why not throw in a new shocker and impy pimped to the max, ohh and a bone daddy for the novelty value.)

 

[Skeet]

Didnt have any problems on saturay by the looks of it..just slightly low cocking preassure on start up..I didnt give the delrin a chance really.....'kin goes allright now!!
Gonna put a Halo on my Xmas/birthay list!!

 

[Rabies]

From what I remember (I'm not generally a cocker person) if you put a gauge in that port under your front block it will read your valve pressure, not the cocking pressure (since it's upstream of your LPR rather than downstream.)

 

[Skeet]

Oh.....poo!
Oh well...pick another hole!

Need a HALO.....need a HALO....need a HALO......need a HALO......
need a HALO.....need a HALO....need a HALO......need a HALO......!