When i had my eblade i actually started with the 17-18 bps settings, then i started trying to get closer and closer to the 24-25 bps settings until a ball would no longer feed, then i backed it up a few to be on the safe side.
Eblade...Advanced setup?
- Thread starter Skeet
- Start date
you do know that if your in eye mode those settings (exept maybe coff) dont do anything.
the cocker will shoot as fast as the loader will feed
the cocker will shoot as fast as the loader will feed
yes...but at the mo..i cant get balls in the breach so assume that its not open long enough!!
where are all the eblade tech ..
did you know that the factory fast setting is a blistering 10.4 seconds!!!
need more
where are all the eblade tech ..
did you know that the factory fast setting is a blistering 10.4 seconds!!!
need more
try going to www.air-powered.com.
go to the- e-cockers tech.room and then "how fast is your e-blade" theres loads of info there to help you.
regards,
EELZ
go to the- e-cockers tech.room and then "how fast is your e-blade" theres loads of info there to help you.
regards,
EELZ
Right...couple of things..
Firstly i thought it might be that my LPR wasnt turned up enough..cant try that atm
Second...this is weird....just checked my eye settings...eye is reading 31 black dellrin bolt forward 33 bolt open...and 008 with purple paint...all done with barrel on and feed neck covered.
Up until now...my eye has been reading like 240 breech open and 230 ish breech closed...008 010 on the paint.
What the fcuk has occured there....have now reduced sensitivity from 128 to 35.
What the fcuk??!!!
Firstly i thought it might be that my LPR wasnt turned up enough..cant try that atm
Second...this is weird....just checked my eye settings...eye is reading 31 black dellrin bolt forward 33 bolt open...and 008 with purple paint...all done with barrel on and feed neck covered.
Up until now...my eye has been reading like 240 breech open and 230 ish breech closed...008 010 on the paint.
What the fcuk has occured there....have now reduced sensitivity from 128 to 35.
What the fcuk??!!!
ive been fiddling with my turtle a little this week.....on a mission to finally get the damn thing up and running....got my air system strapped on and working....slight leak down the barrel so its valve out time later but i have also had a play with a set of settings i found on one of the usa forums and they work pritty well and give 25 bps 
and with the weight of the turtles moving mass, it doesnt bounce eather!
and with the weight of the turtles moving mass, it doesnt bounce eather!