E2 karnivor

[dangerousbob]

Very unhappy with this purchase. Turned up and was NOT as described. Has 2 air leaks and was was described as having none . The dye reg is not new in anyway shape or for more! And to top it off the cocking rod wasn't even attached. Now having to send It off to get fixed at a major cost I didn't at all plan on spending!!!!

 

[dangerousbob]

Dye reg not new!

 

[BOLDY]

I don't know how there were leaks? I used it the week before. I can get 7 or 8 vouches that it was all working.
I don't know how the cocking rod wasn't attached. It bolts into the back block and won't cock without it.
And as for the reg. bought from a friend who claimed he bought it from new and not used it.

I'm sorry you feel that way but I sold it as working with no leaks as it was just that.
Ask @uberjuba. It was his previously

 

[I used to good.Honest]

I had my karnivor workking on saturday morning, by sunday it was leaking, I now just turn down the LPR after I've used it and when I air it up I just adjust the lpr until it fires, then the leaks stop, had 3 karnivors and they have all done the same.
they are a beautiful gun, just temperamental beeeatches.

 

[uberjuba]

can vouch for boldy and the karni, he hasnt long had it off me and was all working perfect last i saw it. and agreed, they can be tempremental and will give a little hiss off the qev sometimes. again agreed just back the lpr off and reset to full cocking cycle to stop it. easy peasy.

and just out of curiosity, if the cocking rod wasn't attached, where did you think it was? lol

are you fairly new to cockers fella? as if you need help or advice there are plenty of us on this forum who would be more than happy to help or just provide info.

feel free to pm me if you need any help

 

[Everyinchtheanimal]

Without you saying where it leaks no one can help. If its leaking down the barrel when first gassed up, cock the karni before gassing up, this is a must for all cockers. Start a thread in the tech section I/most of the other cocker fanatics will be more than happy to help!

 

[Everyinchtheanimal]

Also where are you sending it to get sorted?

 

[dangerousbob]

Thanks for getting bk and offering advise guys. @BOLDY, as u can get vouched for the gun working then all is good and will just have to put it down to it being temperamental. First leak and the worst is from the reg, (think it's the o-ring by the shims) and the second is from a small hole opposite the solenoid, where the rod on the side of the gun screws into. @Everyinchtheanimal a guy I know knows a guy how is a Cocker god and he is gonna sort it out for me. the reg is going be serviced which should sort that leak out. @uberjuba yeah this is my first autococker and didn't know the cocking rod wasn't attached until Sunday when someone who owns one told me it wasn't attached. Learnt a lot Sunday

 

[dangerousbob]

@i used to be good. Honest.... looks like I may have to get used to this being much like a woman. Haha