E-blade settings 4 nexus ram & QEV's

[A.B]

Hi
Have just purchased the above sparklie bits, was told that i'll need to alter a filter menu setting after fitting as the new ram and QEV's will work so well that i'll get blowback in the feed tube, due to the speed of the bolts movement.

Anyone fitted the above and can tell me what setting it is and if it's a certain figure or rough figure i need to change it to, will contact the lovely planet peeps but thought i could get a head start on it tonight.

Thanks

A.B

 

[Skeet]

Change CDEL to 006....you might also want to fiddle with your trigger filter settings TPUL and TREL...
If you have a real short light trigger...it will very likely bounce like buggery with these fitted....apparently...increase TPULL to no more than 008 and start with TREL at 020 and go from there.

 

[Pinchaaay]

Righty ho!!

These are the settings you'll be needin matey GUARANTEED!!

son - 004

Coff - 028

Cto - 255

Con - 065

Cdel - 003

These WILL make your e-blade ripp fo' sure......does with mine!!!!

"Pinchaaay!"

 

[Skeet]

Look mate..dont talk poo...if youve got a 44 and QEV's on your marker...then its setup wrong mate....

A.B....do what I said mate... and it wont rip with his settings any more than standard with the eye off...with the eye on it doesnt matter what the settings that he quoted are really...

 

[Pinchaaay]

Those setting aint just from me skeet dude....................there jack woods!

eclipse cocker wizard!



L8rs dude

"Pinchaaay!"

 

[A.B]

lol- ok thanks guys, i'll give em a go

A.B

 

[Skeet]

Originally posted by Pinchaaay
Those setting aint just from me skeet dude....................there jack woods!

eclipse cocker wizard!



L8rs dude

"Pinchaaay!"

Yeah...they are Factory fast settings...standard...but if you run a 44 and qev's you need to put the CDEL as 006, the thing is so quick, 3 milliseconds is not enough time for the other bits to do what they need to do!

 

[mr15bps]

hummm skeet if it isnt set to cdel 6 wuld that maybe cause drop off and/or shootdown?

 

[Skeet]

Well...im no Cocker Wizard...but, my understanding is that CDEL is the delay time between the sear solenoid activating and the cocking solenoid opening the breach and re-cocking the marker..
If CDEL is to short, the greatly improved cycle time of the 44 and QEV's means that the bolt will close, potentially before the valve has closed properley from the previous shot ...probably, I dont know

Is that Sig better...I know its still...medium-ish but...

 

[mr15bps]

hey skeet wuts yow msn addy?