Domination 30/4/06

[Shades]

Your right we both have them and had probbs with them. Done some modding since on both since last time. Hoppers were not fast enough for one but I've just bought a Reloader II and my lad a TSA. Dan has also imported a 32 degree LCD trigger frame up to 20 bps, made the trigger into a poor mans sweet spot and removed the spring for faster paddling, polished all the moving parts, removed the vertical feed and removed the mesh then drilled the holes larger, made the main spring guide bullet shaped for less wear and friction, drilled the feed neck both sides to reduce blowback pushing the balls back up, and the 16" Tiller barrel is now 11.5" with no holes and highly polished and less clumsy.

Hope it all works....

Don't Know where to begin to tell you what i have done to mine!
Nobby

Don’t forget if you go down Unreal Domination and you have a ramping marker, bouncing trigger or modified trigger (this may include what you are mentioning) it is not allowed.

A number of the site team will be down marshalling this month’s event ( no tournament on that week end for a change) helping things run smoother, and keeping things safe and with in the rules.

See you down there….

Don’t forget if your marker is deemed to be braking the site rules you may change your marker and carry on playing, if not you will be asked to leave the site.

 

[NobbyonDaNET]

Don’t forget if you go down Unreal Domination and you have a ramping marker, bouncing trigger or modified trigger (this may include what you are mentioning) it is not allowed.

A number of the site team will be down marshalling this month’s event ( no tournament on that week end for a change) helping things run smoother, and keeping things safe and with in the rules.

See you down there….

Don’t forget if your marker is deemed to be braking the site rules you may change your marker and carry on playing, if not you will be asked to leave the site.

Yes your quite right, I had a word with Chris because I was concerned about his trigger going full auto. As long as Dan keeps his program to just semi he will be OK to paddle as fast as his little fingers will go. My son says he will keep it set to 12 balls or less as his hopper will only go a bit above that and he does'nt want to chop all the time, Oh! and keep the fps below 270 because of CO2 spikes...


Nobby

 

[stevenrules]

going to bring some marbilizers hopfully

 

[NobbyonDaNET]

Jt trigger

The reason for the trigger change is because the standard frame is said to fire up to 7 bps but tested on both mine they pause intermittently, but steady shots at 2 or 3 bps is possible. If you paddle faster it misses intermittent shots all over the place. The last straw was when he started to have the solenoid sticking, so he bought an new frame.

I must stress we have no intention to break any rules, but to have reliable and farely accurate markers, and a dam good days play.

See you there matey..

Nobby

 

[NobbyonDaNET]

Halo

going to bring some marbilizers hopfully

Bought a Nxe bottle cover and barrel condom of a lad who says he used to play with the Uttoxeter Sharks for a couple of quide and then bought 2000 Halo tornement balls for £15

 

[stevenrules]

sounds good will have to have a go on the jt

 

[NobbyonDaNET]

No probbs

sounds good will have to have a go on the jt

Just hope we got our **** together and they work alright

Nobby

 

[stevenrules]

if they dont give me it for ten mins i know the gun inside out and will fix it for ya will you be a castle man or the wood man

 

[NobbyonDaNET]

Fire fight

Where ever there is a lot of gun play if possible, but if I go in the castle, I will try to get to the front left turret asyou look at the front, it has a good vantage point for all the key areas of play.

 

[NobbyonDaNET]

if they dont give me it for ten mins i know the gun inside out and will fix it for ya will you be a castle man or the wood man

Cheers mate

Nobby